10.6.2 RAID Reinitialization
• To reinitialize the RAID type the following command:
• Type: sh /doremi/sbin/reinit_raid.sh and then press "Enter"
Note: This is a destructive process and all data (features and trailers) on the hard drives will be
lost.
10.7 Ingest From Ethernet (FTP Server)
10.7.1 Uploading Files to a Remote ShowVault via FTP
This section describes how to send package files from a local Linux machine to a networked
ShowVault for ingest.
• Open a new terminal window and follow these steps:
• Type: cd <foldername>/ and then press "Enter"
• The descriptor (foldername) is the name of the folder that contains the package files that
are send to the networked ShowVault for ingest
• An example would be to type cd dcp_package/ and then press "Enter"
• The folder called "dcp_package" contains the source material to be sent to the
ShowVault for ingest
Note: For this example, it is assumed that the movie package is in a folder called
"dcp_package". In practice, the folder name can be whatever the user decides to name it.
• Type: ftp (IP address) and then press "Enter"
• The descriptor is the IP address of the ShowVault to send the package files to
• An example would be to type: ftp 192.168.100.50 and then press "Enter"
• User will be prompted for a login name and password for the networked ShowVault
• Type the following:
• Name: ingest and then press "Enter"
• Password: ingest and then press "Enter"
• This login will automatically put the user into the "/data/incoming/" folder on the
destination ShowVault. This will bring the user to the FTP command prompt: "ftp >"
• From here type the following in the terminal window:
_____________________________________________________________________________________
SHV.OM.001293.DRM Page 68 Version 1.3
Doremi Cinema LLC Confidential
To Next Page
Loading...
