Servicing: 9040, 9040 IP65, 9040S
A36951-C.doc
114/236
Ŷ Start-up following a prolonged shutdown
Starting the printer after a shutdown lasting 8 to 15 days
1. Open gutter located in the print head
2. Start the printer.
3. Perform a STABILITY check, if necessary
4. Perform a five-minute ink REFRESHMENT
routine.
Starting the printer after a shutdown lasting 15 days or longer.
This operation consists of three stages:
1. Drain the ink circuit
Refer to Drain ink circuit procedure contained in this section.
2. Change the main ink filter cartridge.
Refer to "Change ink filter cartridge for 9040, 9040 IP and 9040S printers" procedure
contained in the Maintenance section of this manual.
3. Reintroduce new ink to the printer.
Refer to Re-introduce ink procedure contained in this section.
To Next Page
Loading...
