Editing a message
A36951-C.doc
74/236
Ŷ Use a counter
If you want to print a counter, you first have to specify the parameter settings and then
insert it into the message.
You can also view and reset counter values.
You can insert two different counters in each message.
Display and reset counters
(Production/Message/Counter display/reset)
This function is for viewing counter values and for resetting counters to their original value
if necessary.
When the counter value is displayed, you can reset it to its original value by checking the
corresponding Reset box.
Set counter parameters
Message editing/Parameters/Counter or Counter 2
Select Counter or Counter 2. You can now access the parameters for the counter you
have chosen and make any changes you require:
To Next Page
Loading...
