General
A36951-C.doc
17/236
Ŷ Recycling
The equipment described below is industrial equipment, and therefore cannot be
recycled or recovered as household waste but must be processed using special
methods, as shown by the symbol below.
The following table indicates some of the methods available for recycling machines
when they reach the end of their life cycle. These methods are shown for guidance
purposes only. Other more specialized processes may be used instead of those
indicated.
Please do not hesitate to contact your Markem-Imaje representative for further
information.
Accumulators and batteries used in the equipment must be treated using specialized
methods.
If the equipment is not dismantled on site, the following information must be forwarded to
the service-provider responsible for this operation.
Recycled parts Method
1
Stainless steel cabinet. Material 100% recyclable using any metal processing
method.
2
Containers for consumables and
ink circuits.
These items consist of plastic, metal and composite
materials which are impregnated with or contain ink.
Recommended method:
Ƒ energy recovery.
3
Umbilical and printhead. Ƒ energy recovery,
Ƒ recovery of electrical material,
Ƒ recovery of metals.
CAUTION :
Electronic circuit board present (see 4).
4
Electronic circuit boards, screen
and electrical wiring.
Recommended method:
Ƒ Recovery and treatment of electronic waste
(computers, televisions, etc.).
To Next Page
Loading...
