General
A36951-C.doc
15/236
Ŷ Preliminary instructions / Security
Before starting work, please read these instructions and the materials safety data sheet (MSDS)
for the consumables used.
Disconnect the printer from the electrical source before opening it or changing any of its components.
Liability
Markem-Imaje shall not be held responsible if the safety instructions are not followed, nor more generally if
elementary safety rules are not applied when using and servicing Markem-Imaje equipment.
This equipment is certified to comply with the department of labour regulations in force on the date of manufacture.
Any consequences of modifications or repairs shall be the sole responsibility of the person carrying them out.
The same applies to use not complying with Markem-Imaje specifications.
All Markem-Imaje printers have safety labels that meet the safety standards governing printer use compliant with Markem-
Imaje recommendations.
Any modification carried out may be counter to printer compliance and the relevant safety standards.
Therefore, Markem-Imaje cannot be held liable for any malfunction or damage caused by any modification of the use
recommended by Markem-Imaje or for any incident arising from use of the printer for any purposes other than those for
which it is designed. It is the sole responsibility of the user to take the precautions required by any use to which he or she
puts the printer.
Health / Hygiene
Please read the safety data sheet (MSDS) for the consumables used.
For certain consumables:
Ƒ Wearing contact lenses when handling these consumables is strictly prohibited.
Ƒ Ink-resistant gloves and safety goggles are recommended during filling and cleaning operations.
Max. noise level < 60 dB A.
Fire prevention
It is essential to comply with the instructions on the safety data sheet (MSDS) for the consumables used.
CAUTION: For continued protection against possible fire, use only the ink/solvent mixtures specified by Markem-Imaje.
If your printer uses flammable ink or make-up:
Ƒ Never leave containers containing ink, make-up or cleaning products, or ink-soaked rags (even dry) near the printer.
Ƒ Install a foam, CO2 or powder extinguisher immediately adjacent to the printer (maximum 10 meters).
Ƒ Never smoke near the printer. Affix a sign "NO SMOKING, FLAMMABLE INK" near the printer.
Ƒ Ensure that the printer is kept particularly clean, as dried ink deposits remain highly flammable.
Ƒ Drums of ink, make-up and cleaning solution must be closed and stored in a ventilated room.
en
To Next Page
Loading...
