Editing a message
A36951-C.doc
88/236
Ŷ Use a shift code
Shift codes are used for printing cyclical time information over a one-day period. The code
starts at a specified time.
If you want to print a shift code, you first have to specify the parameter settings and then
insert it into the message.
You can print one shift code per message.
Set shift code parameters
Message editing/Parameters/Shift code
This dialog box contains all the data you need to change your shift code..
ʄ Start time: (hh:mm)
Enter the time when the first shift starts.
ʄ Interval
Specify duration of the shifts. All shifts must be equal in length.
ʄ Type
Select method you want to use to represent shift code:
Ƒ NUMERICAL: 2 digits from 01 to 23
Ƒ LETTER: One letter from A to Z
Ƒ LETTER (-I -O): The letters I and O will not be used lwhen printing the shift code.
To Next Page
Loading...
