Daily operation
A36951-C.doc
53/236
Ŷ Create message
1. Press
(Message Editing/Message/New)
2. Enter the name of the new message (max. 8 alphanumeric characters).
3. Press
ҏ to confirm
4. The cursor starts to flash at the bottom left of the editing area.
Use the arrow keys to move the cursor inside the editing area and compose a message.
All of the functions in the Message editing menu can be accessed by pressing
5. Press
to save the new message and load it in the printer
(Message editing/Message/Load printer).
The new message is ready to be printed.
NOTE
The "Example of message programming" section within this
manual contains a detailed example of how to create a new
message.
Printing area
of a jet
Cursor
To Next Page
Loading...
