Maintenance
A36951-C.doc
157/236
Ŷ Change the pressurization air filter cartridge: -
-
This filter is located on the air treatment assembly inside the hydraulic compartment.
1. Shut down the printer normally and disconnect from the main AC power supply.
2. Disconnect the air supply or air supply close valve to the printer.
3. Unscrew the air filter housing and pull the base downwards.
4. Unscrew the filter
5. Clean the mesh unit using air.
6. Change the filter cartridge and the O-ring seal.
7. Reinstall the assembly.
Figure 1
Air treatment assembly
1
Seal
2
Mesh unit
3
Filter cartridge
4
Filter support
5
Housing
2
1
3
4
5
To Next Page
Loading...
