Dover Markem Imaje 9040 - 3,600-Hour Service Intervals

Servicing: 9040, 9040 IP65, 9040S
A36951-C.doc
117/236
3,600-hour service
1. Drain and flush the printer.
See automatic or manual printer Drain/Flush procedures contained in this section.
2. Change main ink filter cartridge. This operation must be performed at least once
every twelve months.
Refer to procedure for changing 9040, 9040 IP65 and 9040S printer ink filter cartridges
contained in the Maintenance section of this manual.
3. Change the pressurization air filter cartridge. This operation must be performed at
least once every six months.
Refer to procedure for changing 9040, 9040 IP65 and 9040S printer pressurization air filter
cartridges contained in the Maintenance section of this manual.
NOTE We recommend that you run REFRESHMENT function for
around 15 minutes every time you finish servicing the ink
circuit (i.e. after you drain or flush the circuit or change the
filter).
Place an anti-clogging protector between the cannons and the
charge electrodes when you perform the refresh routine.