Maintenance
A36951-C.doc
163/236
Ŷ Test electrovalves
9040, 9040 IP65 and 9040 S printers
Production/Maintenance/ELV status modification
This function allows you to run electrovalves individually to make sure that they are
operating correctly. It applies to:
Ƒ the ink circuit viscometer drain and additive addition ELVs,
Ƒ the head additive and vacuum ELVs.
Move to the row for the ELV concerned and then press the
key. Use the ,
arrow keys to select OPEN or CLOSED.
9040 Contrast printers
Production/Maintenance/ ELV status modification
To Next Page
Loading...
