Servicing: 9040, 9040 IP65, 9040S
A36951-C.doc
124/236
Ŷ Re-introducing ink into the printer
CAUTION
Check consumable expiration date shown on the ink
containers label.
1. Check that the drain plugs and bleed screws are in place.
2. Remove the ink tank lid and pour 1 liter of new ink into the ink tank.
3. Remove the additive tank lid and confirm or fill to the ½ way level mark on the tank.
4. Start the printer and make sure that the jet is present and stable within the gutter.
5. Check pressure:
6. Perform STABILITY check, if necessary.
7. Perform five-minute ink REFRESHMENT routine.
8. Clean and dry print head.
9. Start jet for normal production and ensure no faults are present.
To Next Page
Loading...
