Editing a message
A36951-C.doc
78/236
Ŷ Use a postdate
A postdate is a date which is deferred in relation to the current date.
If you want to print a postdate, you first have to specify the parameter settings, then
compose the date and finally insert it into the message.
You can insert two different postdates in each message.
Set postdate parameters
Message editing/Parameters/Postdate or Postdate 2
The dialog box asks you to enter the following values for each postdate:
Ƒ Duration: between 0 and 9999.
Ƒ Unit: day or month.
The time at which the date changes is common to all postdates and can be altered in:
Printer preparation/Initialization/Autoclock
ʄ Default parameter values
The default parameters are common to all messages and are configured in the
Printer preparation/Parameters/Postdate or Postdate 2 menu
The dialog box is identical.
To Next Page
Loading...
