Editing a message
A36951-C.doc
62/236
Ŷ Define print parameters
Change parameters of a message in production
The fields in this dialog box are described below. The Scrolling action, Transparency
printing and Inverse printing parameters cannot be changed to an existing message.
They must be set prior to creating a message.
Change message parameters
Message editing/Parameters/Message
This dialog box contains all the settings you need to adapt the message to the production
line. These settings are specific to each message.
ʄ Default parameter values
The default message parameters are common to all messages and are configured in the
Printer preparation/Parameters/Message menu.
The dialog box is identical.
To Next Page
Loading...
