Daily operation
A36951-C.doc
49/236
Ŷ Print a message
1. Ensure jet(s)are ready: the light is on continuously.
2. The message or messages to be printed are ready (in production).
3. The cell or cells on the TOP1/TOP2 input or the tachometer on the Tacho input sends a
signal to the printer to trigger the printing operation.
The printer prints the message in production.
Stop/Restart printing
Press and confirm using to stop the current print job.
Press
and confirm using to restart printing.
Load printer
1. Press in Message editing mode to save and load the message.
(Message editing/Message/ Load printer)
2. On a two-head printer, you may need to select the head to be assigned the message
and then press
ҏҏ to confirm
The message is ready to be printed
To Next Page
Loading...
