Daily operation
A36951-C.doc
45/236
Ŷ Printer start-up
1. Ensure printer powered up: indicator light is on.
2. Press
to start the printer.
(
Production/Printer/Start-up)
3. Wait for approximately three minutes.
4. When the printer is ready:
ƑON is displayed
Ƒ The
light goes on (steady light).
You are in the production menu, and the most recently selected message is ready to
be printed.
NOTE The Servicing section contained within this manual, contains
the procedures for starting the printer after an extended shut-
down period.
To Next Page
Loading...
