Maintenance
A36951-C.doc
159/236
Ŷ Change ink filter cartridge:
Tools required:
Ƒ Recovery tank.
1. Shut down the printer normally.
2. Placer a recovery container under the filter and unscrew the lower casing (1).
3. Unscrew the base holder of the cartridge (2).
4. Remove the cartridge and the O-ring (3)
5. Replace the filter support tube (4).
6. Fit the new cartridge and tighten the base holder.
7. Clean the filter casing and fit a new O-ring inside the lower casing
8. Screw the casing back in position.
8. Make sure that the filter is not leaking when you re-start the printer.
3
2
1
4
To Next Page
Loading...
