Editing a message
A36951-C.doc
71/236
Ŷ Use date and time
If you want to print the time and date in a message, you first have to specify time and date
parameter settings, then compose these elements, and finally insert them into the
message.
Specify time and date parameter settings
Printer preparation/Initialization/Autoclock
The printer date and time should normally be set when the printer is installed.
ʄ Hour (hh:mm:ss) / Date (dd/mm/yy)
Enter time and date.
ʄ Date change Hour (hh:mm)
Enter time when the date will change. Default is 00:00. Use this when you want the date to
change at a specified hour of the day other than at 12:00 am.
ʄ Run/Stop autodating
7 : Autoclock display and print data is fixed.
: Autoclock display and print data changes in real-time.
ʄ Date format (dd/mm/yy)
Select format to be used for displaying the date.
ʄ First day of the week
Printer preparation/Initialization/Printer
Specify day on which week starts. The default value is Sunday.
To Next Page
Loading...
