Daily operation
A36951-C.doc
48/236
Ŷ Select a message
1. Press to select a message to be printed.(Production/Message/Message
selection )
2. On a two-head printer, specify the head to be assigned the message:
Go to the Head number field using
or and use to select head 1 (1), head 2
(2) or both heads (1+2).
3. Select the message from the list. The list either contains:
Ƒ All messages: - press
to access the input box and enter the name of the
message
or
- select the message using
or .
Ƒ Pre-selected messaged from the library:
- select the message using
or .
4. press
ҏ to confirm
The selected message is ready to be printed (in production).
NOTE See the "Configure message library" section contained in this
manual, for further details on how to create and manage a
library.
Messages that are not resident in the system have to be
loaded into the printer via the PCMCIA card. See the
"Exchange data" section of this manual for further details.
List of
messages
Name of
messages
assigned to each
head
*: Message
currently
selected
Selected head(s)
Message
displayed
To Next Page
Loading...
