Editing a message
A36951-C.doc
87/236
ʄ Datamatrix code
Ƒ The code used is type ECC200 and the format is calculated automatically
(square or rectangle).
Ƒ Cell size (stretch) is programmable: 1 or 2 drops.
Ƒ The code height can vary between: 8 and 24 cells in stretch mode 1
8 and 12 cells in stretch mode 2
Ƒ All types of variables can be printed with the code.
Maximum code capacity:
Code height
(number of cells)
8 8 10 12 12 12 16 16 16 18 20 22 24
Code width
(number of cells)
18 26 10 12 26 36 16 32 49 18 20 22 24
Number of coded numeric
characters
10 16 6 10 32 44 24 64 98 36 44 60 72
Number of coded
alphanumeric characters
7 12 4 7 24 33 18 48 63 27 33 45 54
Number of coded 8-bit
ASCII characters
5 8 3 5 16 22 12 32 49 18 22 30 36
Stretch 1
Printed code height
(number of drops)
8 8 10 12 12 12 16 16 16 18 20 22 24
Printed code width
(number of drops)
18 26 10 12 26 36 16 32 49 18 20 22 24
Stretch 2
Printed code height
(number of drops)
16 16 20 24 24 24
Printed code width
(number of drops)
36 52 20 24 52 72
CAUTION The resolution of the message will be determined by the
datamatrix code resolution value.
In some cases, it may be necessary to increase the
head/object distance to avoid superimposing drops.
This will make it possible to read the code.
To Next Page
Loading...
