Editing a message
A36951-C.doc
86/236
EAN 128/CODE 128 codes
The character set is divided into four menus that can be found in 128 mode (Code A,
Code B, Code C) and Special characters:
Mode A: includes all standard upper-case alphanumeric characters, command
characters and special characters.
Mode B : includes all standard upper-case and lower-case alphanumeric characters,
numeric characters and special characters. This is the default mode and size is
optimized.
Mode C : includes the set of 100 pairs of digits from 00 to 99, plus special characters
(characters are entered two at a time).
Special characters: includes command characters (NUL, SOH, etc.) plus special
characters (FNC1, SHIFT, AI, etc.). The content of the dialog box depends on choice
made for Mode 128.
These characters can be variables (counters, dates, etc.).
Reverse video characters A, B or C included in the composition line corresponds to codes
A, B or C.
CAUTION If you checked the "Optimization" parameters in the
parameters menu, the only mode available is mode B.
To Next Page
Loading...
