Installation and configuration
A36951-C.doc
187/236
An additive vapor condenser reduces emissions from the printer to a minimum.
The cooling matrix for this condenser is cooled by the air used to pressurize the hydraulic
compartment, in conjunction with a small fan located under the condenser itself.
A circulating fan homogenizes the air continuously and maintains a uniform temperature
inside the hydraulic compartment. A ventilation system can also be provided for the
electronic compartment in certain cases.
The printheads on 9040 IP65 model printers are protected by stainless steel tube with a
removable magnetic stopper.
1 or 2
protected print
head(s)
Mixing fan
Trolley holder
Console IP65
To Next Page
Loading...
