Dover Markem Imaje 9040 - Printhead Dimensions: Angled Fitting

Technical Specifications
A36951-C.doc
222/236
°C
ʄ Right head – angled umbilical fitting
jet N°1
jet N°2
jet N°1
Ombilic Ø 15 mm
rayon de courbure mini :
en statique = 100 mm
en dynamique =115 mm
---------------------------------------
Conduit Ø 0.59 in.
minimum radius of curvature:
static = 3.94 in.
dynamic = 4.53 in.
2 x M6 profondeur utile 8 mm pour fixation tête
2 x M6 depth .315 in. for head fixing
Position des jets / Sens de déflexion
Jet position / Deflexion direction
Position des jets
Jet position
32.4 mm
1.276 in.
39 mm
1.535 in.
3.6 mm
.143 in.
30.5 mm
1.201 in.
14 mm .551 in.
65 mm 2.559 in.
15 mm
.591 in.
44.5 mm
1.752 in.
11.89 mm
.468 in.
9.52 mm
.375 in.
265 mm 10.433 in.
225 mm 8.858 in.
32.5 mm
1.280 in.
47.3 mm
1.862 in.