Name: Draytek Vigor2925 Series
Brand: Draytek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vigor2925 Series User’s Guide

172

packets sending by WAN interface.

Disable – Disable the function of VLAN with tag.

Tag value – Type the value as the VLAN ID number. The

range is from 0 to 4095.

Priority – Type the packet priority number for such VLAN.

The range is from 0 to 7.

Active Mode

Choose Always On to make the WAN connection be

activated always.

Load Balance: Check this box to enable auto load balance

function for such WAN interface.

When the data traffic is large, the WAN interface with the

function enabled will balance the data transmission

automatically among all of the WAN interfaces in

connection status.

Active When

If you choose Failover as the Active Mode, Active When

will appear. Please specify which WAN will be the Backup

interface.

Any of the selected WAN disconnect – Such backup WAN

will be activated when any master WAN interface

disconnects.

All of the selected WAN disconnect – Such backup WAN

will be activated only when all master WAN interfaces

disconnect.

After finished the above settings, click OK to save the settings.

Questions and Answers:

Need help?

Do you have a question about the Draytek Vigor2925 Series and is the answer not in the manual?

Draytek Vigor2925 Series Specifications

General