Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
224
D
D
e
e
t
t
a
a
i
i
l
l
s
s
P
P
a
a
g
g
e
e
f
f
o
o
r
r
L
L
A
A
N
N
I
I
P
P
v
v
6
6
S
S
e
e
t
t
u
u
p
p
There are two configuration pages for LAN1/LAN2/LAN3/LAN4/LAN5/LAN6/DMZ Port,
Ethernet TCP/IP and DHCP Setup (based on IPv4) and IPv6 Setup. Click the tab for each type
and refer to the following explanations for detailed information. Below shows the settings
page for IPv6.
It provides 2 daemons for LAN side IPv6 address configuration. One is SLAAC(stateless) and
the other is DHCPv6 (Stateful) server.
Available settings are explained as follows:
Item Description
Enable
Check the box to enable the configuration of LAN 1 IPv6
Setup.
WAN Primary Interface
Use the drop down list to specify a WAN interface for IPv6.
Static IPv6 Address
IPv6 Address –Type static IPv6 address for LAN.
Prefix Length – Type the fixed value for prefix length.

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)