Vigor3900 Series User’s Guide
343
4
4
.
.
9
9
.
.
4
4
.
.
2
2
L
L
2
2
T
T
P
P
This page display current status for VPN tunnel built with L2TP protocol.
Available parameters are listed as follows:
Item Description
Authenticate Protocol
The router will authenticate the dial-in user with the protocol
selected here.
PAP - It means the router will attempt to authenticate dial-in
users with the PAP protocol.
CHAP - It means the router will attempt to authenticate
dial-in users with the CHAP protocol.
User Authentication
Type
Set user authentication to Local server or RADIUS server.
LDAP profiles
Choose a LDAP profile for PPTP Server if LDAP is selected
as user authentication type.
To clear the selected one, click
to remove current
object selections.
DHCP from
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
DHCP Relay
Enable - Let the router assign IP address to every host in the
LAN.
Disable - Let you manually assign IP address to every host
To Next Page
Loading...
Need help?
General