Vigor3900 Series User’s Guide
483
Item Description
By Station Number –The operation of load balance will be
executed based on the station number configured in this
page. It is used to limit the allowed number for the station
connecting to the access point. The purpose is to prevent lots
of stations connecting to access point at the same time and
causing traffic unbalanced.
By Traffics – The operation of load balance will be executed
according to the traffic configuration in this page.
By Station Numbers or Traffics - The operation of load
balance will be executed by station number or traffic by the
system automatically.
Station Number
Threshold
Please define the required station number for WLAN
(2.4GHz) and WLAN (5GHz) separately.
Traffic Threshold
Upload Limit –Use the drop down list to specify the traffic
limit for uploading.
Download Limit – Use the drop down list to specify the
traffic limit for downloading.
Action when Threshold
Exceeded
Stop accepting new connections – When the access point is
overload (e.g., reaching the limit of station number or limit
of network traffic), it will terminate any new connection
requested by client’s station.
Dissociate existing station by longest idle time - When the
access point is overload (e.g., reaching the limit of station
number or limit of network traffic), it will terminate the
network connection of the client’s station which is idle for a
longest time.
Dissociate existing station by worst signal strength -
When the access point is overload (e.g., reaching the limit of
station number or limit of network traffic), it will terminate
the network connection of the client’s station with the
weakest signal.
Apply
Click it to save the configuration.
To Next Page
Loading...
Need help?
General