ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā
ā¼
Implementing and Handling Applications
DS1103 Hardware Installation and Configuration March 2004
119
ā²
ā ā ā ā ā ā ā ā ā ā I
ā²ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā
To work with a model
1 In the Library: rtilib1103 window, double-click DEMOS.
2 Double-click the box titled Spring - Mass - Damper in the
Library: rti1103demolib window to open the Simulink model
smd_1103_sl.
The Simulink model smd_1103_sl is displayed in an extra window.
3 To examine the model, double-click its blocks.
4 From the menu bar of the Model window, choose Tools ā
Real-Time Workshop ā Options to view the simulation
parameters.
To Next Page
Loading...
