Mapping of I/O Signals
ā²
ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā
DS1103 Hardware Installation and Configuration March 2004
Iā ā ā ā ā ā ā ā ā ā ā ā ā
ā¼
210
ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā ā¼
Conflicts for Slave DSP Space Vector PWM Signal
Generation (PWMSV)
The following I/O features of the DS1103 conflict with Slave DSP
Space Vector PWM Signal Generation:
Slave DSP Space Vector PWM
Signal Generation
(PWMSV) *)
Signal
Conflicting I/O Feature **)
Ch
(RTI)
Ch
(RTLib)
Ch
(RTI)
Ch
(RTLib)
Conflicts Concerning Slave DSP 3-Phase PWM Signal Generation as a Whole
ā¢ If you perform 3-phase PWM signal generation (PWM3) or square-wave signal generation (D2F), you cannot generate
space vector PWM signals at the same time.
*) Related RTI blocks and RTLib
functions:
ā¢ DS1103SL_DSP_PWMSV
ā¢ See Slave DSP PWMSV
Generation in the DS1103
RTLib Reference
**) Related RTI blocks and RTLib functions:
3-phase PWM signal generation (PWM3):
ā¢ DS1103SL_DSP_PWM3
ā¢ See Slave DSP PWM3 Generation in the DS1103 RTLib Reference
D2F:
ā¢ DS1103SL_DSP_D2F
ā¢ See Square Wave Signal Generation (D2F) in the DS1103 RTLib
Reference
To Next Page
Loading...
