dSPACE DS1103 Hardware Installation And Configuration

Installing the Hardware ▲ ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■
DS1103 Hardware Installation and Configuration March 2004
I■■■■■■■■■■■■■ ▼
34
■■■■■■■■■■■■■■■▼
Installation in an Expansion Box
Resources in the
expansion box
When installed in an expansion box, dSPACE boards require the
following resources of the expansion box:
N
The resource requirements listed in this table apply to the expansion
box, not to the host PC.
Resources in
the host PC
The resource requirements for the host PC depend on the connection
between the host PC and the expansion box:
Connection via DS811 Link Board The Link Board requires the
following resources in the host PC:
Board
Required
Address Bytes
Default I/O
Base Address
Required Memory
Required
IRQ
DS1003 8H 318H 64 KB, range starting at
0xD0000H
None
DS1003/DS1004
(AlphaCombo)
10H 310H 64 KB, range starting at
0xD0000H
None
DS1005 10H 300H None None
DS1006 10H 300H None None
DS1102 10H 300H None None
DS1103 10H 300H None None
DS2301 and
DS2302
10H 320H None None
Required
Address Bytes
Default I/O
Base Address
Required Memory IRQ
40H 300H – None (No DS1003 in the
connected expansion box)
None
40H 300H – 64 KB, range starting at
0xD0000H (One or more
DS1003 in the connected
expansion box)
None

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English