dSPACE DS1103 Hardware Installation And Configuration

■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ ▼ Installing the Hardware
DS1103 Hardware Installation and Configuration March 2004
35
▲ ■■■■■■■■■■I
▲■■■■■■■■■■■■■■■
Connection via DS813, DS815, or DS817 Link Board The Link
Boards require the following resources in the host PC:
Connection via Ethernet The boards installed in the expansion
box require no resources in the host PC.
T
The slot CPUs installed in the expansion box as provided by dSPACE do
not conflict with the default I/O base addresses of dSPACE boards.
Connecting a MicroAutoBox to the Host PC
The MicroAutoBox can be connected to the host PC via the Link
Boards DS813, DS815, or DS817. The following resources are required
in the host PC:
Required
Address Bytes
Default I/O
Base Address
Required Memory IRQ
10H Plug & Play None 1 (ISA for
DS813/DS815,
PCI for DS817)
Required
Address Bytes
Default I/O
Base Address
Required Memory IRQ
10H Plug & Play None 1 (ISA for
DS813/DS815,
PCI for DS817)

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English