dSPACE DS1103 Hardware Installation And Configuration

■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ ▼ Setting Up an Ethernet Connection Between PC and Expansion Box
DS1103 Hardware Installation and Configuration March 2004
77
▲ ■■■■■■■■■■I
▲■■■■■■■■■■■■■■■
How to Change the Host Table (Windows NT 4.0)
An IP address is a 32-bit number, usually written as a set of four 8-bit
numbers. For example, 192.100.100.98 is the default IP address of an
expansion box connected by Ethernet.
You can assign one or more alias names to each IP address via the host
table.
To edit the host table
1 Open a DOS window.
2 Change to
%System_ROOT%\system32\drivers\etc.
3 Typ e
edit hosts .
4 Modify the host table according to your needs and save the
changes. The file
hosts.sam can be used as an example of a host
file.
N
Lines beginning with “#” are comments. Multiple aliases for the same
IP address must be separated by a space.

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English