Maintenance
Service Instructions 827/827-M - 01.0 - 05/2019 103
20.4 Checking the toothed belt
The condition of the toothed belt must be checked once a month.
Proper setting
The toothed belt exhibits no cracks or fragile areas.
When pressed with a finger, the toothed belt must yield no more than
10 mm.
Important
A damaged toothed belt must be replaced immediately.
20.5 Parts list
A parts list can be ordered from Dürkopp Adler. Or visit our website for
further information at:
www.duerkopp-adler.com
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before checking the toothed
belt.
To Next Page
Loading...
Need help?
General
