Programming
92 Service Instructions 827/827-M - 01.0 - 05/2019
19.2 Adjusting the stitch count before the carrier roller
is lowered
To adjust the stitch count before the carrier roller is lowered:
1. Press the button.
2. Enter the parameters for the s.p.m. before the carrier roller is lowered:
t1403.
3. Use the buttons A+, B+, C+ and D+ to enter the desired s.p.m.
4. Press the
button to save the setting.
5. To switch to sewing mode, press the button.
For additional parameter settings, refer to Parameter list.
To Next Page
Loading...
