DURKOPP ADLER 827 Service Instructions

Maintenance
Service Instructions 827/827-M - 01.0 - 05/2019 93
20 Maintenance
This chapter describes maintenance work that needs to be carried out
on a regular basis to extend the service life of the machine and achieve
the desired seam quality.
Maintenance intervals
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Work to be carried out Operating hours
8 40 160 500
Machine head
Removing lint and thread remnants 
Cleaning the motor fan mesh 
Check the oil level 
Check the hook lubrication 
Checking the toothed belt 
Pneumatic system
Check the water level in the pressure controller 
Cleaning the filter element 

DURKOPP ADLER 827 Specifications

General

Brand	DURKOPP ADLER
Model	827
Category	Sewing Machine
Language	English