DURKOPP ADLER 827

Working basis
Service Instructions 827/827-M - 01.0 - 05/2019 17
3.3.4 Disassembling and assembling the valve cover
Fig. 4: Disassembling and assembling the valve cover
Disassembling the valve cover
To disassemble the valve cover:
1. Loosen the screws (1).
2. Disassemble the valve cover (2).
Important
When disassembling the cover, make sure not to tear off any cables.
Assembling the valve cover
To assemble the valve cover:
1. Assemble the valve cover (2).
2. Tighten the screws (1).
Important
When assembling the cover, make sure not to pinch any cables.
(1) - Screws (2) - Valve cover
②
①