Stitch length adjusting wheel
30 Service Instructions 827/827-M - 01.0 - 05/2019
7 Stitch length adjusting wheel
Fig. 15: Adjusting the stitch length adjusting wheel
The stitch length adjusting wheel (1) on the machine column determines
the stitch length.
7.1 Adjusting the stitch length adjusting wheel
Proper setting
1. Adjust the stitch length adjusting wheel to 0.
No play on the stitch regulator gear.
The plates for the gear are parallel; the frame cannot be moved.
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set the stitch
length adjusting wheel.
(1) - Stitch length adjusting wheel