DURKOPP ADLER 827 Service Instructions

Programming
88 Service Instructions 827/827-M - 01.0 - 05/2019
OP1000 buttons and functions
Button Function
Thread button group
Start bartack • Sets the start bartack
Multiple start bartack • Sets the multiple start bartack
End bartack • Sets the end bartack
Multiple end bartack • Sets the multiple end bartack
Thread trimmer • Activates or deactivates the thread
trimmer
Thread clamp • Activates or deactivates the thread
clamp
Needle position after sewing stop • Sets the needle position after sewing
stop
Sewing foot lift after thread
trimmer
• Activates or deactivates the sewing
foot lift after the thread trimmer
Sewing foot lift after sewing stop • Activates or deactivates the sewing
foot lift after sewing stops
Soft start • Activates or deactivates the soft start
Speed • Reduces the motor speed
Function button • Activates or deactivates any stored
function
Programming button group
ESC • Ends parameter mode

DURKOPP ADLER 827 Specifications

General

Brand	DURKOPP ADLER
Model	827
Category	Sewing Machine
Language	English