What to do if DA stepper card 1 flywheel position is not found on DURKOPP ADLER 967?
If the DA stepper card 1 flywheel position is not found on your DURKOPP ADLER Sewing Machine: • Check the connection cables. • Check stepper motor 1 for stiff movement.
What to do if DA stepper card 2 encoder plug is not connected on DURKOPP ADLER 967?
If the DA stepper card 2 encoder plug (Sub-D, 9-pin) is not connected on your DURKOPP ADLER Sewing Machine, connect the encoder cable to the control using the correct connection.
What to do if DA stepper card 1 encoder plug is not connected on DURKOPP ADLER 967?
If the DA stepper card 1 encoder plug (Sub-D, 9-pin) is not connected on your DURKOPP ADLER Sewing Machine, connect the encoder cable to the control using the correct connection.
What to do if the internal EEprom is defective and external EEprom is not connected on DURKOPP ADLER Sewing Machine?
If the internal EEprom is defective and the external EEprom is not connected (emergency operating features only) on your DURKOPP ADLER Sewing Machine, replace the control.
What to do if the internal EEprom is defective and external data is not valid on DURKOPP ADLER 967?
If the internal EEprom is defective and external data is not valid (emergency operating features only) on your DURKOPP ADLER Sewing Machine, replace the control.
What to do if my DURKOPP ADLER Sewing Machine is skip stitching?
If your DURKOPP ADLER Sewing Machine is skip stitching, check the threading path of the needle thread and hook thread.
What to do if my DURKOPP ADLER 967 shows a high voltage fault?
If your DURKOPP ADLER Sewing Machine shows a high voltage fault (mains voltage, longer duration >290 V): • Check the mains voltage; if the nominal voltage is continuously exceeded, stabilize it or use a generator.
How to fix checksum error while updating DA stepper card 2 on DURKOPP ADLER 967 Sewing Machine?
To fix a checksum error that occurred while updating DA stepper card 2 on your DURKOPP ADLER Sewing Machine: • Check the connection cables. • Perform a software update. • Replace the DACextension box.
What to do if I get a software version error on my DURKOPP ADLER 967 Sewing Machine (DACclassic)?
If you encounter a software version error on your DURKOPP ADLER Sewing Machine (DACclassic only): • Perform a software update. • Replace the control.
What to do for a communication error on DURKOPP ADLER 967 Sewing Machine (DACclassic)?
If you experience a communication error on your DURKOPP ADLER Sewing Machine (DACclassic only): • Restart the control. • Perform a software update. • Replace the control.
General| Brand | DURKOPP ADLER |
|---|---|
| Model | 967 |
| Category | Sewing Machine |
| Language | English |
Provides fundamental safety guidelines for operating the machine, including prohibitions and essential precautions.
Explains signal words like DANGER, WARNING, CAUTION, and associated symbols indicating hazard severity.
Defines intended use, outlines precautions, and states compliance with regulations.
Covers preparing the machine, switching on/off, needle and thread setup.
Covers checking delivery, removing transport locks, and assembling the stand.
Details electrical/pneumatic connections, assembly, and performing a test run.
Provides customer service contact and explains how to handle software messages and errors.
To Next Page
