Maintenance Manual (960-943) 4-38
Replacement Procedures
Figure 4-37 Installing the keyboard (2)
3. Stick a new INSU KB to the COVER ASSY in place. Make sure the
whole INSU KB is flatly sticked including the four corners.
4.26 LCD Assembly
4.26.1 Removing the LCD unit
To remove the LCD unit, follow the steps below.
1. Release the following screws and separate the LCD Assembly and
Cover Assembly.
Figure 4-38 Removing the LCD unit (1)
2. Remove both hinge caps.
S2.5×2.5CT
LCD Assembly
Cover Assembly
To Next Page
Loading...
