dynabook PORTEGE X30L-J Series User Manual

Maintenance Manual (960-943) 4-16
Replacement Procedures
Figure 4-11 Removing the Fan
4.15.2 Installing the Fan
To install the Fan, follow the steps below.
1. Set the Fan in place on the Cover Assembly and secure it with the
screws.
2. Connect the Fan harness to the connector CN3380 on the System
Board.
4.16 Fin
4.16.1 Removing the Fin
To remove the Fin, follow the steps below.
1. Remove the following screws and then the Fin.
S2 x 3CT
FAN
C
CN3380
Fan harness

dynabook PORTEGE X30L-J Series Specifications

General

RAM	Up to 32GB LPDDR4x
Storage	Up to 1TB PCIe SSD
Graphics	Intel Iris Xe Graphics
Processor	Intel Core i5-1135G7 or i7-1165G7
Display	13.3-inch Full HD (1920 x 1080)
Operating System	Windows 10 Pro
Ports	HDMI, microSD card slot, headphone/mic combo jack
Connectivity	Wi-Fi 6, Bluetooth 5.1