Chapter 8: Preset Menu 107
PRESET MENU
• Sound Delay
Sound Delay varies the time between the arrival of a MIDI Note-On
message and the onset of a note. The delay time is adjustable from 0 to
14 seconds (000-127).
SOUND DELAY
pri:000 sec:000
• Sound Start
This function allows you to set where a sample begins playing when
you hit a key. A setting of 000 plays a sound from the beginning, higher
values move the sample start point toward the end of the sound.
SOUND START
pri:000 sec:000
• Sound Reverse
When sound reverse is turned On, the instrument will be played back-
wards. Since instruments tend to sound very different when reversed,
this function extends the number of possible sounds in Morpheus.
SOUND REVERSE
pri:Off sec:On
The Sound Start parameter allows you to cut off the beginning of the sound. Higher
values move the start point toward the end of the sound.
Sound
Start
••• The Sound Start
parameter can be useful to
remove the gradual attack
of a reversed sound. The
Loop Offset parameters
can also be put to good
use with reversed sounds.
••• See the Step-By-Step
section of this manual for an
application using Sound
Start.
To Next Page
Loading...
Need help?
General
