E-Mu MORPHEUS User Manual

Morpheus Operation Manual224
MIDI IMPLEMENTATION CHART
Transmitted Recognized Remarks
Basic
Channel
Default
Changed
Mode Default
Messages
Note
Number True Voice
Velocity Note ON
Note OFF
After
Touch
Keys
Channels
Pitch Bender
Control Change
Program
Change True Number
System Exclusive
System
Common
:Song Pos
:Song Sel
:Tune
System
Real Time
:Clock
:Commands
Aux
Messages
:Local On/Off
:Active Sense
:Reset
No
No
1
1-16
Memorized
No Mode 1, 3, 4
MONO, POLY
OMNI, ON/OFF
Memorized
No
No
0-127
0-127
No
No
Yes
No
v=1-127
No
No
Yes
Yes
No Yes
No Yes
No
No
Yes 0-127
Yes 0-127
Yes Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Notes: Pan 0=hard left 127=hard right
Function…
Mode 1: OMNI ON, POLY
Mode 3: OMNI OFF, POLY
Mode 2: OMNI ON, MONO
Mode 4: OMNI OFF, MONO
0-31
Bank Select No Yes
64-79
All Sound Off
Reset All Controllers
No Yes
No Yes
All Notes Off No Yes
GENERAL INFORMATION FOR MORPHEUS SYSEX
• Product ID for Morpheus is 0C.
• Device ID is [00-0F] (0-15 decimal).
• Parameter Number and Parameter Value are 2 bytes each.
• Since MIDI data bytes cannot be greater than [7F] (127 decimal), the
data values are “nibble-ized” to a 14-bit signed 2's complement format.
• There is one edit buffer for the current preset (the preset shown in
the display), one for the hyperpreset, and one for the midimap (the
current midimap). Only one preset, hyper or midimap can be edited at
a time via SysEx commands and changing the current preset, hyper or
midimap erases the associated edit buffer.

E-Mu MORPHEUS Specifications

General

Brand	E-Mu
Model	MORPHEUS
Category	Synthesizer
Language	English