E-Mu MORPHEUS User Manual

Morpheus Operation Manual124
PRESET MENU
• Footswitch Control
This function allows you to route the 3 footswitch controllers (1, 2 or 3)
to any of the footswitch destinations. The footswitches can be routed to
switch: Sustain (pri/sec/both), alternate volume envelope (pri/sec/both),
alternate volume release (pri/sec/both), cross-switch between the pri-
mary and secondary instruments or switch portamento Off or On (pri/
sec/both).
FOOTSWITCH CTRL
1 -> Sustain
• Pitch Bend Range
This function allows you to specify the pitch wheel range for the cur-
rent preset if pitch bend is not being globally controlled in the Master
menu. Pitch bend range is only used when the pitch wheel is used to
control pitch.
PITCH BEND RANGE
+- 12 semitones
• Pressure Amount
This function allows you to specify an overall amount parameter for
mono or poly keyboard pressure data (pre-patch cord). The pressure
amount is variable from -128 to +127.
PRESSURE AMOUNT
+127
• MIDI Controller Amount
This function allows you to specify an overall amount parameter (pre-
patch cord) which variable from -128 to +127 for each of the MIDI
controllers.
CONTROLLER AMT CONTROLLER AMT
A:+127 B:+127 C:+127 D:+127
▼ Pressure Amount and
Controller A-B-C-D Amount
are MASTER Controls which
affect the amount of modula-
tion which can be
programmed in the Realtime
Modulation section.
In order for the Realtime
Modulation Control amounts
for these functions to have a
full range of control, the
Pressure and Controller A-D
amounts must be set to
+127.

E-Mu MORPHEUS Specifications

General

Brand	E-Mu
Model	MORPHEUS
Category	Synthesizer
Language	English