Morpheus Operation Manual26
MASTER MENU
• Proteus Sysex
When this function is On, Proteus presets can be transferred over
MIDI into Morpheus. It also allows the use of Proteus patch editing
programs. Instrument numbers and parameters which are unique to
Morpheus will, of course, NOT be transferred. This function defaults
to Off to avoid unplanned conflicts with Proteus Sysex transfers.
PROTEUS SYSEX
Off
• Auto Select
When editing a parameter which involves the keyboard, such as a
zone range, the parameter can be automatically selected simply by
playing the keyboard. This is a handy feature for “power program-
mers”, but can sometimes be confusing. Therefore, Auto-Select can be
turned On or Off. Auto-Select affects the following parameters: User
Key Tuning, Zone Select, Key Range, Midimap, Preset & Hyperpreset
Naming, Cross-switch Point, Keyboard Center.
AUTO-SELECT
Off
• Compare
This function turns the Compare feature (accessed by pressing the
Preset button when editing) On or Off. If Compare is turned On,
changes made via MIDI SysEx will not be heard except when the
Preset menu is enabled.
COMPARE
On
• Viewing Angle
This function allows you to change the viewing angle of the display so
that it may be easily read from either above or below. The angle is
adjustable from +7 to -8. Positive values will make the display easier to
read when viewed from above. Negative values make the display easier
to read from below.
VIEWING ANGLE
+7
▼ If Morpheus does not
espond to external preset
ditors, turn the Compare
unction Off.
To Next Page
Loading...
Need help?
General
