EasyManuals Logo

E-Mu MORPHEUS User Manual

E-Mu MORPHEUS
269 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Morpheus Operation Manual20
MASTER MENU
• User Key Tuning
In addition to standard twelve tone equal temperament, Morpheus
contains four additional preset tuning tables (Just C, Vallotti, 19 tone,
and Gamelan) and one user definable tuning. User Key Tuning allows
you to alter the parameters of the user definable tuning stored in
memory. The initial frequency of every key can be individually tuned,
facilitating the creation of microtonal scales. Using the cursor key and
the data entry control, select the key name, the MIDI key number and
the fine tuning. The key name is variable from C-2 to G8. Coarse
Tuning (which also happens to be the MIDI key number) is variable from 0
to 127. The fine tuning is variable from 00 to 63 in increments of 1/64
of a semitone (approx. 1.56 cents). For each preset, the specific tuning
table is selected in the Preset menu.
USER KEY TUNING
Key:C1 036-00
• Global Bend
This function sets the range of the pitch wheel controller (even when
pitch wheel is not routed to control pitch). The maximum pitch bend
range is ± 12 semitones. This function only affects presets which have
their individual pitch bend range set to global.
GLOBAL BEND
+/- 12 semitones
• Global Velocity Curve
Incoming velocity data can be modified by a velocity curve in order to
provide different types of dynamics in response to your playing or to
better adapt to a MIDI controller. This function allows you to select
one of eight global velocity curves or leave the velocity data unaltered
(off). Global velocity curve only affects presets which have their indi-
vidual velocity curve set to global.
GLOBAL VEL CURVE
8
•• Application: The user
ey tuning can be used to
une individual percussion
nstruments.
It is possible to tune the
itch up so high that the
ange of Morpheus' pitch
hifter is exceeded. If the
itch will not go any higher,
ry using the Transpose
ontrol instead of Coarse
uning.
•• In order for the Pitch
Wheel to control pitch, it
must be routed to this
estination in the Realtime
Modulation Control screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the E-Mu MORPHEUS and is the answer not in the manual?

E-Mu MORPHEUS Specifications

General IconGeneral
BrandE-Mu
ModelMORPHEUS
CategorySynthesizer
LanguageEnglish

Related product manuals