Chapter 3: Master Menu 23
• MIDI Program Change Map
Incoming MIDI program changes can be remapped to a different
numbered preset. This is a handy feature when you want a specific
MIDI program number sent from the master synth to be linked with a
specific preset or hyperpreset on Morpheus. For example, the Program
Change Map could be set to call up preset 12 whenever Morpheus
receives program change number 26. Any preset or hyperpreset in
Morpheus can be mapped to any incoming MIDI program change
number. There are four separate Program Change Maps available. This
feature also allows you to call up presets in any bank, which are not
accessible through a standard MIDI program change. Note: The
Program Map only operates if it is selected in the Midimap
and if the Bank Select function in the Midimap is set to
bank 0.
PROG CHG MAP #1
026 > 012
MASTER MENU
••• The Bank Select function
is located in the Midimap
menu.
0
r
Program 00 is called Program
01 with a corresponding di
ference through all the num
bers.