E-Mu MORPHEUS User Manual

Chapter 4: Midimap Menu 31
• Midimap Name
This function allows you to name each of the 16 Midimaps with a
name of up to 12 characters. Position the cursor underneath the
character location and use the data entry control to change the char-
acter. The keyboard can also be used to select characters.
This screen displays the current Midimap. The Midimap Select screen
is the last screen in the menu.
MIDIMAP NAME
M15 New Song
• Preset/Hyper to MIDI Channel Assign
This function allows you to assign a preset or hyperpreset (program) to
each MIDI channel for the currently selected Midimap.
Position the cursor under the channel number and use the data entry
control to change the MIDI channel. Position the cursor under the
program number and use the data entry control to change the pro-
gram assigned to each MIDI channel.
PRESET/HYPER C01
061 Space Wash
• Volume, Pan & Output Mix
This function sets the Volume, Pan Position and Output Mix for each
MIDI channel in the selected Midimap. Volume allows you to adjust
the relative volume between programs. Pan allows you to position
each program in the stereo field. The Volume control acts as an at-
tenuator on the program volume. It cannot increase the volume past
the setting programmed in the program.
▼ The Pan control Overrides the pan value programmed in the
program.
VOL PAN MIX C01
127 =P FxA
MIDIMAP MENU
0
▼ The Auto-Select feature i
n
the Master menu must be
turned On in order to use the
keyboard for naming
Midimaps.
▼ The MIDI channel shown
in the right side of the screen
is NOT the MIDI basic
channel, only the one being
edited in the Midimap.
••• Channel Pan should
normally be set to “P” unles
s
realtime control of panning i
desired. If Pan is set to “0”, a
stereo preset will play in
mono.

E-Mu MORPHEUS Specifications

General

Brand	E-Mu
Model	MORPHEUS
Category	Synthesizer
Language	English