E-Mu MORPHEUS User Manual

Chapter 7: Preset Programming 83
PRESET PROGRAMMING
Morph
Preset 1
Volume
Preset 2
When Presets are Selected,
the Free-Run
Function Generator has No Effect
Free-Run
FG
Hyperpreset
Free-Run
FG
Free-Run
FG
Morph
Preset 1
Volume
Preset 2
The Free-Run
Function Generator ONLY works
in a Hyperpreset.
Free-Run
FG
Hyperpreset
Free-Run
FG
Free-Run
FG
The Free-Run Function Generator only works in a Hyperpreset, even though the
modulation routing is made in the preset.
The Free-Run FG begins the instant the Hyperpreset is selected and
continues to run until stopped by its programming or when another
Hyperpreset is selected. If the Free-Run FG is not programmed
to loop, it simply runs to the last segment and stops! Because
it continually runs (if so programmed) and is not started at the begin-
ning of a note like the preset function generators, it is called “free-
running”.
The functions of the Free-Run FG are almost identical to the preset
FG's except that the conditional jumps are more limited. The condi-
tional jumps are listed below.
Never
............................. Never jumps. Always goes on to next segment.
Always End ................ Always jumps at the end of the current segment.
Note On End................ Jumps at the end of the segment if the note is still
on.
Note On Imm. ............. Jumps immediately if the note is still on.
Note Off End ............... Jumps at the end of the segment if the note is off.
Note Off Imm. ............ Jumps immediately if the note is off.
Footsw. 1-3 End .......... Jumps at the end of the segment if the selected
Footswitch is pressed.
Footsw. 1-3 Imm. ....... Jumps immediately if the selected Footswitch is
pressed.

E-Mu MORPHEUS Specifications

General

Brand	E-Mu
Model	MORPHEUS
Category	Synthesizer
Language	English