Eads TGR990 - Making a Group Call; Receiving a Group Call

Direct Mode Operation - DMO
35
The TGR990 automatically adjusts communication type to a mode
depending on a Gateway or Repeater signal presence. If no signal
presence is detected, the terminal switches to MS - MS
communication.
Q Making a group call
Select the group from Talkgroup list you require. Press PTT and wait
for the grant tone before speaking into the microphone remembering
to release the
PTT to listen.
Group folder name
→
Group name →
Q Receiving a group call
When an Group call is received, the mobile will automatically go into
group mode and receive the call, also the group caller name will
appear in the screen.
Calling Party ID number
→
Group name →
TGR990_features.book Page 35 Thursday, December 3, 2009 9:43 AM