Private call
37
5. Private call
Q
General
A Private Call, also called Point-to-Point or individual call, is a call
between two individuals. No other terminal can hear the
conversation.
For operating the TGR990 in RF sensitive areas, see Transmit
Inhibit on page 31.
Note:
While Transmit Inhibit is activated, an incoming Private
Call is indicated, but it is not possible to answer the call.
Q
Making a private call
1. From the Home display select Private
Mode using and .
2. When in Private Mode, dial a number.
3. Press and hold the
PTT
button. Wait for the talk permit tone (if
configured) before talking, and release the
PTT
when listening.
4. To end the call press .
v
Private In Use: Call set-up procedure is completed. Terminal is in
Traffic mode.
TGR990_features.book Page 37 Thursday, December 3, 2009 9:43 AM
To Next Page
Loading...